Beebe Healthcare Training Facility — Glare Control Film in Lewes, Delaware
About 400 square feet of 5% reflective solar-control window film on the Beebe Healthcare training facility at 444 Savannah Road in Lewes — a former retail space full of old single-pane storefront glass, now a computer training room where glare on monitors was the whole problem.
- Film installed
- ~400 sq ft
- Film
- 5% reflective solar control
- Glazing
- Single pane storefront
Project snapshot
- Client
- Beebe Healthcare
- Location
- 444 Savannah Road, Lewes, Sussex County, Delaware
- Sector
- Healthcare — training and education facility
- Scope
- Approximately 400 sq ft of perimeter glazing
- Product
- 5% reflective solar-control window film
- Primary goal
- Aggressive glare control at computer workstations
- Existing glass
- Older single-pane storefront system, retained
PDF case study
Beebe Healthcare — project documentation
Shareable one-page summary of the scope, products and finished work.
The challenge
Beebe Healthcare's training facility in Lewes occupies a former retail space with extensive older single-pane storefront glazing. The building was designed to put merchandise on display from Savannah Road — big, bright, uninterrupted glass.
The room's use changed; the glass did not. It is now filled with rows of computer workstations, including desks set directly against the perimeter glazing. Bright exterior conditions produced strong contrast and reflected glare across the monitors, making long training sessions uncomfortable and, at some seats, genuinely hard to work through.
Older single-pane glass also carries almost no solar-control performance, so the perimeter of the room ran hot on sunny days.
Project objectives
- Cut major glare across the computer training room
- Reduce direct solar load on trainees seated near the perimeter glass
- Improve screen visibility and visual comfort throughout the space
- Upgrade the performance of the older single-pane glazing without replacing the storefront system
Why this solution
This was not a keep-it-as-clear-as-possible project. A computer-heavy room needs controlled brightness more than maximum daylight, so the specification moved deliberately toward a dark reflective film rather than a light, low-visibility product.
A 5% reflective solar-control film gives a much darker exterior appearance and knocks down brightness before it ever reaches a monitor surface, while adding solar-control performance the original single-pane glass never had.
The retrofit keeps the existing glazing and frames in service. Replacing a commercial storefront system is expensive and disruptive; when the glass is serviceable and the real issues are glare, brightness and solar heat, film is the practical path.
The exterior reads as a clean, consistent reflective elevation that sits comfortably with the facility's branded lower glazing graphics.
Installation approach
- 1
Each lite across the perimeter storefront run was measured and cut individually — the original retail glazing is not uniform, and the frames are original.
- 2
Interior surfaces were fully prepped before application; older storefront glass and aged framing need more preparation than new construction glass.
- 3
Work was sequenced around the training schedule so the facility stayed usable.
- 4
Approximately 400 sq ft installed across the training room and adjoining glazed areas.
Results
- Roughly 400 sq ft of 5% reflective solar-control film installed across the training facility glazing
- Significant glare reduction at the computer workstations, including seats directly beside the glass
- Added solar-control performance to older single-pane glass that previously had almost none
- Original storefront glazing and framing retained — no envelope replacement, minimal disruption
- Usable daytime outward view retained behind a darker reflective exterior appearance
Project photos
Real photos from this project or program. Tap any image to view it larger.
Commercial window film in Lewes, Delaware
Lewes commercial glass has a particular problem: a lot of it is older single-pane storefront glazing in buildings that have changed use at least once. Retail spaces along Savannah Road and Second Street become medical offices, training rooms, professional suites and restaurants — and the glass that was designed to show off merchandise now sits behind desks, monitors and patient seating.
Add the coastal light. Reflection off the Lewes–Rehoboth Canal, the ferry terminal lots, light pavement and bright sand-colored surfaces raises the effective brightness on south- and west-facing elevations well past what an inland building deals with. Glare on screens, hot perimeter seating and faded finishes are the three complaints we hear most from Lewes business owners.
The Beebe Healthcare training facility at 444 Savannah Road is a clean example of the fix: roughly 400 square feet of 5% reflective solar-control film on the original single-pane storefront system, no glass replacement, no envelope work, and a training room that is finally comfortable for screen work. The same approach applies to medical suites near Beebe's main campus on Savannah Road, downtown retail, and offices along Kings Highway and Route 1.
Shore Tint & More has served Lewes and Sussex County since 1989 as a 3M Authorized Dealer, covering solar and glare control, daytime privacy, decorative and frosted graphics, and safety and security film for commercial, institutional and residential glass.
Beebe Healthcare — frequently asked questions
Sharing this project with a board, committee or facility team?
Download the Beebe Healthcare Lewes case study (PDF)Have a similar building or portfolio?
Send us the scope, the plans, or just a few photos. We survey, specify, and install across Delaware and the Maryland Eastern Shore.
- Response within one business day
- 3M Authorized Dealer · IWFA accredited
- Serving Delaware since 1989