3M safety & security · Product detail

    3M Safety S140 (S14) Security Window Film

    A clear three-ply polyester safety and security film with 14 mil nominal thickness. Selection depends on the existing glass, frame and objective; the film alone is not a ballistic or universal forced-entry solution.

    Construction and reference glass

    3M's technical specifications identify Safety S140 (SH14CLARL) as a three-ply polyester film with 14 mil nominal thickness. The published visible light transmission is 85% on the manufacturer's reference glass. Those are reference values, not an installed-building rating.

    3M requires its Impact Protection Attachment for all break-and-entry applications. Separately, IPA is required for spontaneous breakage applications on single-pane tempered glass. Glass type, frame and application must match current manufacturer instructions. It is not bullet-resistant. 3M's technical specifications do not approve S140 for windstorm applications.

    Specification questions

    1. What glass and frame exist at each opening?
    2. Is the objective safety-glazing retention or forced-entry delay?
    3. What attachment is specified and supported by the frame?
    4. Which report matches that complete assembly?

    Compare Ultra S800, S2400 and 3M IPA.

    3M Safety S140 questions

    S14 is a commonly used shorthand; the manufacturer documentation identifies the product as 3M Safety S140 (SH14CLARL). Confirm the exact specified product in the submittal.

    3M requires Impact Protection Attachment for all break-and-entry applications. Separately, IPA is required for spontaneous breakage applications on single-pane tempered glass. Match current instructions to the actual opening.

    No. Nominal film thickness is a material dimension. Performance belongs to a specific tested assembly of glass, film and attachment; it is not a promise of delay time or bullet resistance.

    Clear-film specification

    Where S140 belongs in the assembly

    The three-ply film is one part of a clear security glazing proposal. The opening determines what additional connection and documentation are needed.

    1. 01 / Glass

      Confirm the existing pane and reference-glass basis.

    2. 02 / Film

      Specify 3M Safety S140 by its full product designation.

    3. 03 / Frame

      Review IPA requirements and suitability for the application.

    Discuss these openings

    Security glazing · Shore Tint & More

    Compare the complete system

    Film, glass, attachment and frame determine what can be specified for an opening.

    Schedule a Shore Glazing Survey