3M Film Library — Safety & Security

    3M S2400 Security Window Film (Scotchshield)

    A 24 mil nominal (approximately 25 mil with adhesive) TPU-based, optically clear security film for glass retention. Rated as part of a specified system with the 3M Impact Protection Attachment — not as a standalone barrier.

    Polyurethane, not stacked polyester

    S2400 is a polyurethane-based security film. The construction is what gives it its thickness and tear behaviour while staying optically clear.

    24 mil film / ~25 mil with adhesive

    The current 3M Technical Specifications list 24 mil / 610 µm nominal film thickness; the current Technical Data Sheet (Rev B, April 2025) lists 635 µm / approximately 25 mil total thickness with adhesive.

    Clear glass, blocked UV

    The current data sheet lists about 89% visible light transmission and 99% UV rejected, so the appearance of the glazing barely changes.

    Rated as a system, not a product

    The published safety glazing and blast results apply to specific tested glass, film and attachment configurations — not to every window.

    Published specifications

    Figures below are taken from current 3M documentation. Test results apply to the specific glass, film and attachment configurations 3M tested.

    ConstructionTPU / polyurethane, optically clear security film (3M Technical Data Sheet, Rev B, April 2025)
    Nominal film thickness24 mil / 610 µm nominal film (current 3M Technical Specifications)
    Thickness with adhesive635 µm / approximately 25 mil total with adhesive (3M Technical Data Sheet, Rev B, April 2025)
    Visible light transmission~89% (3M Technical Data Sheet, Rev B, April 2025)
    UV rejection99% UV rejected (3M Technical Data Sheet, Rev B, April 2025)
    Safety glazing testingANSI Z97.1 Class A (Unlimited) on specified 1/8 in and 1/4 in annealed glass (current 3M Technical Specifications)
    Blast configuration (with 3M IPA)S2400 + 3M IPA on 1/4 in annealed or tempered single-pane glass: GSA Rating 2 and ASTM F1642 Minimal Hazard at 6 psi / 42 psi-msec (current 3M Technical Specifications). That result belongs to that tested configuration only.
    Required attachment3M Impact Protection Attachment for all applications, per the current S2400 product page; follow exact glass/frame instructions
    3M states that these window films are not bulletproof and are not designed to stop intruders. They may help retain broken glass and potentially delay entry under appropriate conditions. Sources: current 3M Scotchshield S2400 Technical Specifications and Technical Data Sheet (Revision B, April 2025).

    Related products & systems

    S2400 project documentation

    Attachment specifications and 3M safety & security documents for your submittal.

    3M IPA — Architectural Specification

    PDF Spec

    CSI-format spec section for specifying IPA on commercial projects.

    Download

    3M Impact Protection Attachment — Technical Data

    PDF Tech Sheet

    Structural sealant data sheet for the 3M IPA attachment system.

    Download

    3M Forced-Entry Protection Overview

    PDF Data Card

    Attack testing, delay times, and film-plus-attachment system basics.

    Download

    3M S2400 FAQ

    Current manufacturer facts, without the exaggeration

    No. 3M explicitly states that S2400 and its safety and security window films are not bulletproof and are not designed to stop intruders. Installed with the 3M Impact Protection Attachment they may help delay entry and help hold broken glass in the frame.

    The current 3M Technical Specifications list 24 mil / 610 µm nominal film thickness. The current Technical Data Sheet (Revision B, April 2025) lists 635 µm / approximately 25 mil total thickness with adhesive — the difference is simply film alone versus film plus adhesive.

    The current 3M Technical Data Sheet (Revision B, April 2025) lists approximately 89% visible light transmission and 99% UV rejected for this TPU-based film.

    The current S2400 product page specifies 3M Impact Protection Attachment for all applications. Always follow the current manufacturer documentation for the exact glass, frame and application.

    The current 3M Technical Specifications publish ANSI Z97.1 Class A (Unlimited) testing on specified 1/8-inch and 1/4-inch annealed glass. The result applies to those tested configurations only.

    They are different constructions for different priorities. S2400 is a thicker polyurethane-based film; Ultra S800 is a micro-layered tear-resistant laminate. Which one gets specified depends on the glass, frames, threat basis and the tested configurations that match them.

    Next step

    Specify S2400 with the right attachment

    We survey glass and frames, then match a tested configuration to your conditions.

    Security glazing · Shore Tint & More

    Compare the complete system

    Film, glass, attachment and frame determine what can be specified for an opening.

    Schedule a Shore Glazing Survey