How Smart Window Film Works
Smart film is a PDLC layer bonded to your existing glass. With the power off, the liquid crystals inside it scatter light and the glass reads as frosted and private. Apply low voltage and the crystals align, so light passes straight through and the glass turns clear — immediately, with no moving parts.
OFF is private, ON is clear
That relationship is the whole product. Power off means frosted and private. Power on means clear. It matters practically: a power cut leaves the glass in its private state rather than exposing the room, and it means the glass only draws current while it is being held clear.
The switch is immediate. There is no fade-in delay to design around, no motor, no track and no blind stack to hide in a ceiling pocket.
What the electrical side actually looks like
This is a low-voltage system with a published working voltage of 45–60 VAC, fed from a transformer sized for the panel area it serves. Consumption is 0.5 W per square foot while the film is held clear.
Ghost Glass™ installation guidance requires that electrical connections be completed by a licensed electrician. Improper wiring can void the warranty, so we coordinate the low-voltage connection with a licensed electrician on every project.
- Glass dimensions for every opening
- Film type
- Wiring direction and path
- Transformer / power supply sizing and location
- Control selection
- Installation conditions on site
Smart film vs. smart glass
Smart glass is a manufactured insulated glass unit with the switchable layer laminated inside it at the factory. Replacing the glass means new units, new lead time, and in a commercial building, glazing work.
Smart film is the retrofit path. The switchable layer is applied to the glass already in the opening, which is why it suits an occupied conference room, an existing shower enclosure or a finished home far better than tearing out glazing. Functionally, both deliver privacy on demand; the difference is what has to be removed to get there.
Where the size limits land
Maximum cut width is 5.9 ft, with unlimited length. A 12-foot-wide partition is therefore not one impossible panel — it is a deliberate multi-panel layout, and we decide during the survey where those vertical joints fall so they read as an intentional mullion line rather than a seam you notice.
Published specifications
Published manufacturer figures for the PDLC material platform we install.
- Switching states
- OFF = frosted / private · ON = clear
- Transition
- Immediate
- Working voltage
- 45–60 VAC
- Electricity consumption
- 0.5 W per sq ft
- Maximum cut width
- 5.9 ft
- UV protection
- Up to 99.99%
Power off returns the glass to its private, frosted state.
No moving parts, no blinds, no track hardware.
Low-voltage system fed from a transformer / power supply.
Length is unlimited; wider openings are split into multiple panels.
How you switch it
Available controls depend on the project — the switch, remote or smart-control option is selected during planning alongside the wiring path and transformer location.
Wall switch
A hard-wired switch beside the opening — the simplest and most common control for a conference room, bathroom or partition.
Remote
A handheld remote for openings where running a switch leg is impractical or the client wants to control several panels from one place.
Compatible smart control
Depending on the project, the low-voltage circuit can be driven by a compatible smart control so the glass can be scheduled or included in a scene.
Frequently asked
How does smart film work?
Smart film contains a PDLC (polymer dispersed liquid crystal) layer. With no power applied the crystals are randomly oriented, scattering light so the glass looks frosted. Applying low voltage — a published 45–60 VAC working range — aligns the crystals so light passes through and the glass becomes clear. The change is immediate and there are no moving parts.
What is the difference between smart film and smart glass?
Smart glass is a factory-built glass unit with the switchable layer laminated inside, so using it means replacing the glass. Smart film applies the switchable layer to glass you already have, which makes it the retrofit option for existing partitions, shower enclosures and windows.
What happens to smart film during a power outage?
The glass returns to its frosted, private state. Power off is the private state by design, so an outage never leaves a room exposed.
How much electricity does smart film use?
Published consumption is 0.5 watts per square foot while the film is held in its clear state. Power off is the frosted, private state.
Talk through your glass with someone who has measured a few thousand openings
Smart film cannot be priced from a photo — panels are fabricated to your exact openings and the wiring has to physically exist. A short on-site survey turns that into a real number.