Application

    Smart Film for Glass Partitions

    Glass partition systems are expensive to reglaze and easy to film. Applying switchable privacy film to the panels you already have turns a fixed transparent wall into a wall with two settings, without touching the partition system itself.

    Retrofitting a system you have already paid for

    Demountable partition systems are a significant capital item, specified for flexibility. Swapping their glass for factory switchable units throws away that investment, introduces lead time on the system components, and puts a construction crew back into a finished floor.

    Film keeps the frames, the seals, the door hardware and the reconfigurability. If the partition moves later, that is a conversation about the panels, not a write-off.

    Laying panels out to the framing

    This is the detail that separates a partition retrofit that looks intentional from one that looks patched. Maximum cut width is 5.9 ft; most partition modules are narrower than that, which is convenient — the film joints can land exactly on the existing vertical mullions and effectively disappear.

    Where a module is wider, we choose a joint line during the survey rather than centering it by default, because a joint that relates to something in the room reads as design and a joint that relates to nothing reads as a mistake.

    Getting power into a partition

    Partitions are the one place where the wiring is genuinely elegant: the head track or the mullion cavity usually provides a route, and the transformer can sit above the ceiling near the run. That path, its direction and the transformer sizing and location are all fixed during planning, and a licensed electrician makes the final connection.

    Published specifications

    Published manufacturer figures for the PDLC material platform we install.

    Maximum cut width
    5.9 ft

    Length is unlimited; wider openings are split into multiple panels.

    Working voltage
    45–60 VAC

    Low-voltage system fed from a transformer / power supply.

    Electricity consumption
    0.5 W per sq ft
    Application method
    Dry-apply

    Installed without a wet water/slip solution.

    Frequently asked

    Can switchable film be retrofitted to an existing glass partition?

    Yes. The film applies to the partition glass in place, so the frames, seals, door hardware and demountability of the system are untouched. No panel is removed or replaced.

    Where do the film joints fall on a partition wall?

    On the mullions wherever possible. Maximum cut width is 5.9 ft and most partition modules are narrower, so a joint per module usually aligns with existing framing. Wider modules get a deliberate joint line chosen during the survey.

    How is power run to a glass partition?

    Usually through the head track or mullion cavity, with the transformer located above the ceiling near the run. The wiring direction, path and transformer sizing are fixed during planning and a licensed electrician completes the connection.

    Talk through your glass with someone who has measured a few thousand openings

    Smart film cannot be priced from a photo — panels are fabricated to your exact openings and the wiring has to physically exist. A short on-site survey turns that into a real number.