Smart Film for Delaware Homes
Residential smart film gives a home's glass two states: clear when you want the light and the view, frosted when you want the room to itself. It is applied to your existing windows, doors and shower glass, so nothing gets replaced.
Where it earns its place in a Delaware home
Coastal Delaware homes are built around glass. Sussex County beach houses, Lewes and Rehoboth new builds and Wilmington-area contemporaries all lean on window walls, frameless showers and glass-walled offices — and every one of those details creates a privacy problem that a curtain solves badly, because the curtain is also what you bought the glass to avoid.
- Frameless shower and wet-room glass that stays clear for daylight and goes private in use
- Entry door glass and sidelites — clear for light, frosted when the entry should be closed off
- Ground-floor rooms facing a neighbor or a sidewalk on a tight coastal lot
- A glass-walled home office that needs to disappear from the great room during calls
- Interior glass between a primary suite and a bath
The honest trade-offs for a homeowner
Smart film is a premium product. Our planning range is $35–$85 per sq ft installed, so a single shower enclosure is a real line item, and every opening needs power brought to it and connected by a licensed electrician. In a finished home, the wiring path is frequently the harder half of the project — not the film.
That is also why we will happily tell you when a permanent frosted film does the same job for a fraction of the cost. Smart film is worth it where the room needs both states. Where it only ever needs one, it is not.
Planning it into a renovation or a new build
The best time to spec smart film is while walls are open. If you are building or renovating in Sussex, Kent or New Castle County, bring us in during rough-in and the transformer location, wiring path and switch position get designed instead of retrofitted. We work with builders on this the same way we do on our builder and wholesale program.
Product lead time is 12–20 working days after the survey, so it needs a place on the schedule rather than a last-minute call.
Published specifications
Published manufacturer figures for the PDLC material platform we install.
- Switching states
- OFF = frosted / private · ON = clear
- Transition
- Immediate
- UV protection
- Up to 99.99%
- Electricity consumption
- 0.5 W per sq ft
- Product lead time
- 12–20 working days
- Film warranty
- 5-year limited
Power off returns the glass to its private, frosted state.
No moving parts, no blinds, no track hardware.
Normal lead time; varies with sizes and quantity.
Subject to proper handling, installation, wiring, testing and edge sealing.
Frequently asked
Can smart film be used on shower glass?
Yes — frameless shower and wet-room glass is one of the most common residential applications. Which face of the glass the film is applied to, along with the wiring path and transformer location in a finished bathroom, is determined during the survey for each specific enclosure.
Do I have to replace my windows to get smart film?
No. Smart film is applied to the glass already in your home, which is what makes it viable in a finished house. No glazing is removed.
How much does residential smart film cost?
Our planning range is $35–$85 per sq ft installed. Planning range only. On-site measurement and electrical review required for a firm price. Electrical scope may be billed separately.
Will smart film work with my home automation system?
Depending on the project, the low-voltage circuit can be driven by a wall switch, a remote, or a compatible smart control. Which options apply is confirmed during planning alongside the wiring and transformer design.
Talk through your glass with someone who has measured a few thousand openings
Smart film cannot be priced from a photo — panels are fabricated to your exact openings and the wiring has to physically exist. A short on-site survey turns that into a real number.