Beebe Medical Group Window Film Replacement in Millville, DE
Shore Tint & More removed failing window film from the rehabilitation and training area of a Beebe Medical Group building in Millville, Delaware, and installed approximately 100 square feet of 3M Night Vision 15. The new film gives the glass a cleaner, more uniform appearance while helping control solar heat and uncomfortable glare, including glare reflected from vehicle windshields in the parking lot.
- Film installed
- ~100 sq ft
- Film
- 3M Night Vision 15
- Scope
- Remove & replace
Project snapshot
- Property type
- Commercial healthcare building
- Location
- Millville, Sussex County, Delaware
- Space
- Rehabilitation and training area used by older adults
- Scope
- Removal of failing existing film and new installation, approximately 100 sq ft
- Film installed
- 3M Night Vision 15
- Primary goals
- Uniform glass appearance, solar heat and glare control
The challenge
The rehabilitation and training area faces a parking lot and was taking on significant solar heat and glare. Sunlight bouncing off parked vehicle windshields added a second, lower-angle source of glare into the room.
The film already on the glass was failing. It had become visibly uneven and unattractive, so the windows looked worn from inside and out and the old film was no longer a dependable base for comfort.
Project objectives
- Remove the failing film completely rather than covering it
- Restore a clean, uniform appearance to the glass
- Improve solar heat and glare control for people using the space
- Address reflected glare coming from vehicles in the parking lot
- Work respectfully around an occupied healthcare space
Why this solution
New film cannot be applied over failing film. Adhesive breakdown, bubbling or discoloration in the old layer would show straight through, so the existing film had to come off and the glass had to be cleaned back to a sound surface first.
3M Night Vision 15 is a darker dual-reflective sun control film. It suited this room because the problem was strong direct sun plus bright reflected light from the parking lot, and the goal was a consistent, finished look across the glass.
No temperature, energy or glare measurements were taken on this job, so the results are described by what changed on the glass rather than by performance numbers.
Installation approach
- 1
The work area was protected with drop cloths and equipment near the windows was worked around.
- 2
The failing film was removed and the remaining adhesive was cleaned from the glass so the new film would bond to a clean surface.
- 3
The glass was prepared, and 3M Night Vision 15 was cut, positioned and applied across approximately 100 square feet of glass.
- 4
Edges were finished and the area was cleaned before the space returned to normal use.
Results
- Failing film removed and replaced with 3M Night Vision 15
- A cleaner, more uniform appearance across the treated glass
- Improved control of solar heat and uncomfortable glare, including reflected glare from the parking lot
- Approximately 100 square feet of glass treated
- No measured temperature, energy or glare figures are published for this project
Project photos
Real photos from this project or program. Tap any image to view it larger.
Commercial window film in Millville and coastal Sussex County
Many Millville and coastal Sussex County medical and retail buildings face open parking lots, which adds reflected glare to ordinary sun exposure. Treating the glass is a practical way to address both without replacing windows.
Shore Tint & More installs commercial solar-control and glare-control film throughout Sussex County, including remove-and-replace work where older film has failed.
Related applications
Beebe Medical Group building, Millville — frequently asked questions
Have a similar building or portfolio?
Send us the scope, the plans, or just a few photos. We survey, specify, and install across Delaware and the Maryland Eastern Shore.
- Response within one business day
- 3M Authorized Dealer · IWFA accredited
- Serving Delaware since 1989