Sabre Restaurant at La Quinta — Commercial Window Tinting in Salisbury, Maryland
Approximately 220 square feet of dining-room glass at the Sabre restaurant inside the La Quinta hotel in Salisbury, Maryland treated with 3M Night Vision 15 reflective window film for stronger solar control along the guest seating window wall.
- Glass treated
- ~220 sq ft
- 3M Night Vision 15
- Reflective solar film
- Salisbury, MD
- Restaurant + hotel

Project snapshot
- Venue
- Sabre restaurant inside the La Quinta hotel
- Location
- Salisbury, Wicomico County, Maryland
- Property type
- Restaurant inside a hotel
- Scope
- Approximately 220 sq ft of glass
- Product
- 3M Night Vision 15 reflective window film
- Project type
- Hospitality solar-control retrofit on existing glass
PDF case study
Sabre restaurant at La Quinta — project documentation
Shareable one-page summary of the scope, products and finished work.
The challenge
The Sabre dining room is built along a long window wall. Booths, tables and guest seating sit directly beside the glass, so whatever the glass does, the guests in those seats feel first.
That is the recurring pattern in restaurant and hotel dining rooms generally: strong daylight through a large glazed wall, glare across tables and screens at certain hours, solar heat gain at perimeter seating, and UV exposure on upholstery and finishes. Those are the typical concerns behind this category of work rather than a list of measurements taken on this job.
The room also has to keep working as a dining room. Any glass upgrade needed to happen on the existing glazing, without replacing windows and without changing the way the space is laid out.
Project objectives
- Add stronger solar control to the dining-room window wall
- Reduce harsh brightness and glare potential along the guest seating
- Help manage solar heat at perimeter booths and tables
- Maintain a usable outward view from the dining room
- Create a consistent reflective appearance across the treated glass
- Keep the existing glass — a retrofit, not a window replacement
Why this solution
3M Night Vision 15 is the darker end of the Night Vision range: a reflective solar-control film specified where stronger solar management and a reflective daytime appearance are both wanted. That fits a hospitality window wall with seating pressed against it.
3M publishes the Night Vision series as a sun-control film with a dark, reflective exterior appearance and comparatively lower interior reflectivity than older mirrored films, which is why it comes up for rooms occupied into the evening.
Reflective film is not one-way glass and it is not 24-hour privacy. The reflective effect depends on which side is brighter: during the day, with more light outside than inside, the glass reads reflective from outdoors. After dark, when the interior is the brighter side, that effect diminishes and reverses — lit interiors become more visible from outside at night.
Published Night Vision 15 performance values are manufacturer data measured on specific reference glass. Actual results vary with the existing glass configuration, so the technical data sheet below is the reference — no performance figures were measured on this job.
Installation approach
- 1
Access planned around fixed booths, tables, pendant lighting and furnishings that could not be relocated.
- 2
Surfaces along the glass line covered and protected before any prep work started.
- 3
Each lite measured individually and the glass cleaned and prepped so nothing was trapped under the film.
- 4
3M Night Vision 15 cut to each opening, applied, squeegeed and trimmed to the glass line.
- 5
Work carried out inside an operating hospitality interior, with the dining room reset and each pane inspected before the crew left.
Results
- Approximately 220 sq ft of dining-room glass completed with 3M Night Vision 15
- A uniform darker, reflective appearance across the treated window wall in the finished photos
- Outward views remain visible through the treated glass
- An in-place retrofit — the existing glazing stayed, no windows replaced
- No temperature, energy or glare measurements were taken on this project, so none are published
Project photos
Real photos from this project or program. Tap any image to view it larger.
Commercial window film for Salisbury and Eastern Shore restaurants, hotels and storefronts
Salisbury sits at the center of the Maryland Eastern Shore commercial market, and the buildings reflect it: hotel and restaurant glass along the highway corridors, offices near the medical and university campuses, and street-level storefronts downtown. Large glazed walls are the common thread.
Hospitality glass is its own problem set. Guests sit at the window, staff cannot stage tools in a walkway, and the room has to look finished when the crew leaves. That is the kind of work this project represents — an in-place retrofit on existing glazing inside a working restaurant.
We cover Salisbury, Ocean City, Berlin, Easton and the surrounding Eastern Shore alongside our Delaware service area, so a hotel with properties on both sides of the line can use one installer.
Sabre restaurant at La Quinta — frequently asked questions
Sharing this project with a board, committee or facility team?
View the 3M Night Vision 15 technical data sheet (manufacturer data — values vary by glass configuration)Have a similar building or portfolio?
Send us the scope, the plans, or just a few photos. We survey, specify, and install across Delaware and the Maryland Eastern Shore.
- Response within one business day
- 3M Authorized Dealer · IWFA accredited
- Serving Delaware since 1989