160 square feet of glass treated at a private home in Selbyville, Sussex County, Delaware. 3M Night Vision 15 carried the bedrooms, kitchen, dining room and three bathrooms for sun, glare and daytime privacy, while two movie-room windows took a darker 5% window film to hold more light out of the room.
This Selbyville home sits on open ground near the Delaware–Maryland line, with lawn and farmland on the sun-facing sides and very little mature tree cover to break up daylight. Glass that faces open ground takes direct light for a long stretch of the day, with nothing outside doing any of the shading work.
The homeowner's stated goals were sun control, glare control and improved daytime privacy from the road and yard without keeping every curtain drawn. The rooms also had different jobs — the living spaces were to stay daylit, while the movie room called for noticeably less daylight.
Night Vision 15 is a dual-reflective sun control film — more reflective on the exterior face, with lower interior reflectivity than the exterior-facing side, though window reflections can still be visible at night. It addresses solar heat, glare and daytime privacy while leaving the outward view intact, which is why it went on the bedrooms, kitchen, dining room and all three bathrooms.
The privacy effect is daytime privacy: it depends on the exterior being brighter than the interior. After dark with interior lights on, the effect reverses. This is not one-way glass, and blinds or curtains remain the answer at night.
The homeowner wanted noticeably less daylight on the screen wall, so those two openings — and only those — took a darker 5% window film. No brand or product line is published for that film because the specific product was not documented for this project.
The tradeoff is why the rest of the house did not get it: lower visible-light transmission makes a room dimmer all day and generally provides stronger glare reduction, while solar-heat performance depends on the specific film, the glass and the published technical data rather than darkness alone. Specifying room by room is what lets a household have both. No measured temperature, heat, glare or energy figures are published for this home.
Selbyville sits at the southern end of Sussex County on the Maryland line, a short drive from Fenwick Island and Bethany Beach. Homes on open lots here call about glare first — with little mature tree cover, sun-facing glass takes direct light for most of the day. Glass type and condition vary widely house to house and affect which films are appropriate, so the glass in each opening is reviewed before a shade is recommended.
3M Night Vision 15 sun control window film across the bedrooms, kitchen, dining room and three bathrooms, plus a darker 5% window film on two movie-room windows. The job covered 160 square feet of glass in total.
Because the homeowner wanted noticeably less daylight in that room. A darker 5% film was specified for those two openings only. Every other room kept the lighter Night Vision 15 shade so it would still read as a daylit room.
No. Reflective sun control film gives daytime privacy, because the effect depends on the outside being brighter than the inside. After dark with interior lights on the effect reverses. This is not one-way glass, and blinds or curtains are still the right answer at night.
Yes. Room use, desired brightness, glare and privacy goals, glass compatibility and published product data all affect the recommendation, so different rooms can call for different shades. Pricing depends on the films selected and the scope.
Yes. Selbyville is minutes from our home base. Shore Tint & More installs residential window film in Selbyville, Fenwick Island, Ocean View, Frankford, Bethany Beach, Millsboro and throughout Sussex County, along with the rest of Delaware and the Maryland Eastern Shore.
Request a free estimate or call (302) 947-4624. Shore Tint & More (Delaware Window Film) — 3M Authorized Dealer, IWFA accredited, serving Delaware and the Maryland Eastern Shore since 1989.